by Andy Adams | Sep 18, 2017 | Health & Safety, QSC News
When it comes to selecting the correct Personal Protective Equipment (PPE) it can be a mine field. Did you know for example there are different types of cut resistant gloves ? Cut 1 being the least protective to Cut 5 being the best. You do not always need the highest...
by Andy Adams | Sep 5, 2017 | Environmental, QSC News
Do you store oils or lubricants outside in your storage yard? Are the drums or cans kept on a bund that can hold 25% of the total literage stored? All too often Companies forget some of the basic storage considerations. If you are going to store oils etc outside place...
by Andy Adams | Aug 23, 2017 | QSC News, UKAS Certification
Congratulations to Mashood and the team at Aeroservices Limited in achieving ISO 9001:2015 certification in both their Leeds and Dubai offices. Aeroservices Ltd specialise in the supply and distribution of aviation lubricants and is an established and preferred...
by Andy Adams | Aug 14, 2017 | QSC News
Quality Systems Consultancy Ltd have been approved once again as a specialist deliverer of the IOSH Managing Safely Course. Quality Systems Consultancy Limited pride itself on delivering comprehensive interactive training courses including the IOSH Managing Safely...
by Andy Adams | Aug 7, 2017 | QSC News
Arbil Ltd, a machining manufacturer, based in Lye near Stourbridge have been ISO9001:2008 certified for a number of years but wanted to upgrade to the new requirements of the 2015 ISO Standard. We have been working with the team at Arbil for the past few months...
by Andy Adams | Jul 17, 2017 | Environmental, QSC News
Under the Control Of Substances Hazardous to Health regulations it is essential to know what workplace exposure levels (WEL) the workforce is being exposed to. When do you need to monitor? Monitoring is appropriate: when you need to show compliance with a (Workplace...
by Andy Adams | Jun 1, 2017 | QSC News
In ISO 9001:2015 clause 9.1.2 refers, which requires the business to show how it monitors customer satisfaction. There are many ways to achieve this task. A lot of businesses choose to send out a questionnaire asking several questions on how the customer felt...
by Andy Adams | May 27, 2017 | QSC News
Staffordshire Health & Safety Consultant, Andy Adams from Quality Systems Consultancy ready to help with your Business Management systems When you need a Staffordshire Health & Safety Consultant, I’m Andy Adams and I am busy helping businesses like yours...
by Andy Adams | May 11, 2017 | QSC News
ISO 9001:2015 ISO 9001:2015 came into force September 2015. The standard replaces the old ISO 9001:2008 which becomes obsolete on 15th September 2018. To achieve the new standard there are some key changes that companies need to do, The following areas are significant...
by Andy Adams | May 8, 2017 | QSC News
Following a substantial company expansion and the introduction of new processing equipment SPM found itself facing several new challenges. Along with managing the rapidly changing business, we had a requirement to obtain ISO14001:2015 in a relatively short period of...
